No Disks Detected | Dell Perc H310, First Setup

[Outfielder301]

Hello, Unraid cant find my drives. This is my first NAS/Unraid Install.

 

I have attached the Diagnostic zip.

Unraid Version: 6.11.5

 

My Hardware:

Mobo: Asus Strix X570-F

HBA: Dell Perc H310

Cable HBA<->Disks: 2x Inter-Tech SFF-8087 to 4x S-ATA, cross-over

Disks: 6x Seagate Ironwolf 4TB (ST4000VN006)

 

What I have tried so far:

Check if Disks are ok: yes, if i connect them directly to the Mobo they are all detected

Is HBA detected: seems like it; In "Tools->System Devices->PCI Devices and IOMMU Group" this is listed: 0a:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)

BIOS Boot Settings:

- CSM: Enabled

- Boot Device Control: UEFI and Legacy OPROM

Installed the "CA Fix Common Problems" Plugin

 

I tried checking if the H310 Controller is in IT mode but i cant find anything that tells me that. I have a second H310 that gives me the option after boot to go into the RAID configuration, the one currently installed does not. After POST-ing Unraid boots up.

 

With my limited knowledge, i would say that i have the wrong cables for attaching the Drives.

munitionsbox2-diagnostics-20230407-1504.zip

[JorgeB]

HBA is in IT mode, main suspect would be the cables, you need forward breakout cables, reverse breakout look the same but won't work.

[Outfielder301]

Thank you, i will try that.

 

Could you tell me how you determined the mode of the HBA?

[Outfielder301]

New Cables work well, thanks