Hello everyone!

 

I'm brand new to Unraid, and French
 

my config

case: Silverstone cs380

motherboard: Asus tuf gaming b550 plus

CPU: Ryzen 5 5600G

ram: 2x 16gb ddr4 3600mhz

4 x 16to hard drives (2x Ironwolf, 2x Exos) that I will upgrade by adding at least 4 other 16to

nvme: 2x 250gb for cache

 

I therefore wanted to test Unraid before purchase, I must have 26-27 days left.

but when creating the one if I didn't have a good USB key!!!

I created my key on a Corsair Voyager usb3.0 in 128go, but the problem is that this key is really at the end of its life, Unraid installed it, it was barely running at 2mo'sec and I know what's gone!!

so the time I buy a good quality Transcend key that I just received, I would like not to have to redo the parity test

because it took more than 20 hours

 

so currently I have not put data inside because almost as much time to move

 

thank you for all your answers and for taking the time to read me!!

Edited April 15, 20233 yr by jsteck

54 minutes ago, jsteck said:

I would like not to have to redo the parity test

If you assign all the drives exactly as they were, you can select "parity is already valid".

 

It would still be a good idea to check parity though.

thank's your for answer if I understood correctly I could change USB key without too much problem but do not forget that currently I am in test mode

 

 

After reflections and not seeing too much solution I bought 12bays Unraid and I went on a new USB key!!