CrazyLordy Posted April 15, 2023 Share Posted April 15, 2023 So i started getting this errors when iam trying add a new drives. Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read Apr 15 11:23:28 Tower kernel: ldm_validate_partition_table(): Disk read failed. Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read Apr 15 11:23:28 Tower kernel: md2: unable to read partition table Apr 15 11:23:28 Tower kernel: md2: running, size: 7814026532 blocks Apr 15 11:23:28 Tower emhttpd: shcmd (424): udevadm settle Apr 15 11:23:29 Tower emhttpd: Opening encrypted volumes... Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 4, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 8, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 16, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 32, async page read Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 64, async page read The drives iam trying to add are all new even run a s.m.a.r.t. extended test without any issues. and pre-clear also. But when adding to array i noticed this. Even done a clean unraid install since kinda touth it was a issue there. but that wasnt it. What i have done so far: Changed out the cables "sas mini to sata" Changed out the sas controllers Clean install off Unraid as stated above. i have also replaced the cables "sas mini to sata" and the sas controllers. MB: Asus ROG STRIX B450-F GAMING PSU: Evga 650W GS2 Controllers: LSI 9210-8I in IT MODE Atm i only have 4 drives connected and 2 nvme``s. Anyone got any idea or tips on what can be the issue? PS: i do have the logs/diagnostic from before i did a clean unraid if thats wanted also. tower-diagnostics-20230415-2319.zip tower-syslog-20230415-2119.zip Quote Link to comment
CrazyLordy Posted April 16, 2023 Author Share Posted April 16, 2023 here is also the diagnostic/syslog from before the clean Unraid install. thor-syslog-20230412-2117.zip thor-diagnostics-20230412-2317.zip Quote Link to comment
Solution JorgeB Posted April 16, 2023 Solution Share Posted April 16, 2023 Those are normal for new array drives, just ignore, once they are added and formatted the errors will be gone. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.