Log file filling with input/output errors

[goldbondx]

I am filling up my flash. I keep getting warning of 86% full. It appears to be related to the following:

 

1. I am receiving the same errors repeatedly in libvirt.txt. .

2023-04-30 20:51:09.069+0000: 9481: error : virNetSocketReadWire:1791 : End of file while reading data: Input/output error
2023-04-30 20:54:30.523+0000: 9481: error : virNetSocketReadWire:1791 : End of file while reading data: Input/output error
2023-04-30 21:04:31.989+0000: 9481: error : virNetSocketReadWire:1791 : End of file while reading data: Input/output error

 

2. Looking at the vfio-pci I have this:

Loading config from /boot/config/vfio-pci.cfg
BIND=0000:06:00.0|10de:2484 0000:06:00.1|10de:228b
---
Processing 0000:06:00.0 10de:2484
Error: Vendor:Device 10de:2484 not found at 0000:06:00.0, unable to bind device
---
Processing 0000:06:00.1 10de:228b
Error: Device 0000:06:00.1 does not exist, unable to bind device
---
vfio-pci binding complete

Devices listed in /sys/bus/pci/drivers/vfio-pci:

 

 

3. I looked at the vfio-pci.cfg and see this line:

BIND=0000:06:00.0|10de:2484 0000:06:00.1|10de:228b

 

Are the 2 related and should I simply delete the BIND statement in the vfio-pci.cfg? 

I have no VM's running. All Docker now. I attemped to play with passthru on a windows VM months ago but gave up. 

[JorgeB]

6 hours ago, goldbondx said:

0000:06:00.0|10de:2484

Delete this part

[goldbondx]

Just a quick update..

Zero errors on boot and what is weird was WAY faster on boot. Thanks again @JorgeB!