Hi All,

 

Just installed the final piece of hardware (hard drives excluded) into my unRAID tower. I ran the following command to make sure all my SATA ports are detected:

 

dmesg|grep SATA|grep link

 

And it came back with 8 SATA ports. These ports appear to be the ports from my motherboard (4), PCI-e SATA card (2), and PCI SATA card (2). The SASLP ports do not appear to be showing up or detected at all.

 

When I turn on the computer, the card is detected and it finds that no drives are connected to it (not a problem, don't have any drives connected to it yet) and then it proceeds to boot into unRAID.

 

If someone can please let me know what I can do to fix this, I'd greatly appreciate it.

 

Also, for further info:

 

unRAID Pro 4.7

SASLP-MV8 - INT 13 has been disabled; bios is .21

ASUS M2A-VM Motherboard

 

System log attached.

 

Thanks in advance!

syslog-2011-08-11.txt

It's working fine. Look for sas or mvsas and scst.

It's working fine. Look for sas or mvsas and scst.

 

Oh, OK. Glad to hear everything's OK!

 

Thanks!