DigitaLogic Posted May 16, 2023 Share Posted May 16, 2023 (edited) Firmware has been updated to current, as well as bios and uefi. Cant seem to find the full compliment. looks like its missing 6 drives. not detecting them in system devices or in unassigned. im sure diagnostics are going to be asked for as I have seen in a few other threads so they are included. Happy to answer all questions you have. Any and all assistance would be appreciated. tower-diagnostics-20230515-1938.zip Edited May 16, 2023 by DigitaLogic adding info. Quote Link to comment
JorgeB Posted May 16, 2023 Share Posted May 16, 2023 I assume the missing drives are also not detected in the HBA BIOS? If you swap cables from a good drive to a missing one does it appear? Quote Link to comment
DigitaLogic Posted May 16, 2023 Author Share Posted May 16, 2023 New cables should arrive tomorrow to test that on the cable side. I was curious if they were at fault as well so i went ahead an ordered another one just incase. although i do have cables where some drives show up and some don't. Currently in the middle of a Parity rebuild after a failed drive so I will check HBA as soon as its complete and report back. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.