May 17, 20233 yr I get up some mornings (every 5 days or so) and notice that my Home Assistant is not doing its job. When i go to check i notice that i can not reach the unRaid tower. i will then have to hard reset and everything comes back up with no problems or errors (that i find). i have researched as best i can, and i think the problem MAY be tdarr (because it only happens at night, and that is when tdarr is scheduled) but it will run fine for a week or so then crash again, so i am unsure. Can someone take a look at my logs and tell me what i am missing (not an expert)? I put the mirrored syslog in the logs folder of the zip. i9 13900k cpu, but i am NOT using the iGPU for anything, i use a P2000 Thanks tower-diagnostics-20230517-0818.zip
May 17, 20233 yr Author 3 minutes ago, JorgeB said: Enable the syslog server and post that after a crash. This was done, the mirrored syslog from the flash drive is in the logs folder of the uploaded zip file. syslog (flash).zip
May 17, 20233 yr Community Expert Unfortunately there's nothing relevant logged, this usually points to a hardware issue, one thing you can try is to boot the server in safe mode with all docker/VMs disabled, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.