dgs2001 Posted May 24, 2023 Share Posted May 24, 2023 Ok so I'm confused but here goes - 1-servers been running fine for months 2-flash was backed up 2 days ago 3-today i did a clean shutdown to increase the ram in the server 4-unplugged server and removed 2x16gb ddr ram sticks 5-added into same slots 2 x 32gb ram sticks 6-plugged back in switched on and hit f2 to get into bios 7-updated bios 8-rebooted expecting unraid to fire up 9-direct connected monitor didnt respond, waited for approx 1 minute 10-with no screen output and no activity lights i hard powered down 11-left server unplugged for a minute, removed additional graphics card to force on board then reconnected power 12-server started straight into uefi bios screen, no unraid 13-tried another couple of times in different usb ports- no difference 14-used usb creator to install fresh unraid trial to a second usb stick 15-installed 2nd usb and booted straight to unraid no problem 17-manually copied everything from original usb stick to desktop 18-used usb creator to put a fresh unraid on original usb 19-server boots straight to unraid from original usb stick (Fresh Install) 20-used usb creator to put 2 day old backup on 2nd usb stick 21-2nd usb stick will not boot to unraid, just goes to uefi bios 22-check with a third usb stick that a fresh install boots correctly - it does 23-use usb creator to install 2 day old backup to 3rd usb - it wont boot just goes to uefi bios screen 24-thinking maybe my 2 day old flash backup was somehow corrupted i find a 6 month old backup and install that to all 3 usb sticks to test 25-none of the 3 usb sticks will boot to unraid from the 6 month old backup (srever goes straight to uefi bios settings 26-all 3 usb sticks will boot to a fresh install I'm confused, all 3 usb sticks will happily boot a fresh install but none will boot either backup & None will boot from the original files. Can anybody help? flea2-diagnostics-20230522-1538.zipCould this be something to do with the increase in Ram ? (The server reports the ram correctly in the bios screen and all other settings look fine) The attached diagnostics file is from the original flash 'logs" folder Quote Link to comment
dgs2001 Posted May 24, 2023 Author Share Posted May 24, 2023 15 minutes ago, trurl said: Did you test the new RAM? Only by looking in the bios to check it shows up and then booting to a fresh install Quote Link to comment
Solution itimpi Posted May 24, 2023 Solution Share Posted May 24, 2023 It is worth pointing out that the config folder on the flash drive has your settings. When you have a flash drive that is booting then just copy that from the backup and it should then boot OK. 1 Quote Link to comment
dgs2001 Posted May 25, 2023 Author Share Posted May 25, 2023 So a fresh install with the original config copied over seems to be booting and working fine. There's quite a few files no longer on the flash drive but I'm thinking that's a good thing, just need to see if anything doesn't work now Thanks Quote Link to comment
itimpi Posted May 25, 2023 Share Posted May 25, 2023 1 hour ago, dgs2001 said: There's quite a few files no longer on the flash drive but I'm thinking that's a good thing, just need to see if anything doesn't work now They are obviously not part of any standard install though or they would be there. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.