hi i have nothing but propfind  and one options error and login i not sure whats going on?

i recently  changed motherboard and ram  due to i had parity errors  bit flips apparently and a corrupt disk1 due to bad ram but also found out malfunctioning board

from a asus x570 strix motherboard with 32gb desktop ram 3200mhz

to 

asus x570 tuf gaming motherboard with 32gb  ECC ram 3200mhz  

 

i tried to keep things similar..  now i get errors now i never seen before so not sure if its due to motherboard switch or so  but maybe you guys know

 

my server is 192.168.0.3  and my desktop pc  is 192.168.0.227  and i usually leave the unraid server open as i usually doing something on the webpage like krusader etc  

 

and i been moving files over from older 12tb drives to newer 14tb  drives and running 3 14tb Preclear

 

i find it kicks me out of the terminal well locks it up..  unraid is slow  and if i ssh in after a minute or less it kicks me out

 

root@Tardis:/mnt/user# cd /usr/local/emhttp/client_loop: send disconnect: Connection reset

 

even my recyling bin is messed up i posted in the recyling bin page

 

is there a scanner that scans the unraid to make sure things are all working ok... the fix common issues isnt finding any errors.. but something like a windows tweakers where it scans registeries and possible issues  does unraid have something like that other then fix common issues 

 

here is a current diagnostic

tardis-diagnostics-20230529-0917.zip

Edited May 29, 20233 yr by comet424

I'm seeing realtek NICs in your server.  They are not recommended for Unraid.  The Realtek drivers are not reliable in Linux because they are not well maintained.  Intel NICs would be a better choice.  This might be the cause of your GPFs.

I'm also seeing this:

May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)

 

I think that may be this device:

00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
	Subsystem: ASUSTeK Computer Inc. Starship/Matisse GPP Bridge [1043:87c0]
	Kernel driver in use: pcieport

 

ah ok i use the onboard nic for unraid  and the real tek card i use for home assistant.   so realtek is not updated at all? yet they make them?

 

and the

```May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)```

what is that?

and 

```May 28 21:16:48 Tardis kernel: pci 0000:0d:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)```

 

whats that

 

is that the  LSI SAS Card and or the Expander Card I have in there?

im finding  if i make access my server at 192.168.0.3   that be accessing the Intel nic  i guess intel nic onboard  network card   if i have krusader open  it closes and u gotta reconnect the connect button  then stays open    it just started this crap  in the past day  when i swapped board..  and ram  

what a headache i gotta figure out lol ugh  the vnc keeps disconnecting  

Edited May 29, 20233 yr by comet424

after a clean reboot  my vnc  connections are still disconnecting  frustrating

why do all these "propfind" error threads fade off into the sunset without a solution?  For me its random throughout the day from a couple different computer ip's on the network.  Some days it doesn't happen, then for a few days it happens 3 or 4 times....

heres the latest error today...they flood the log for a few lines, always show IP's from 2 or 3 of the same PC's, and block up SMB access from the other PC's on the network for a few seconds...super weird.

Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729068 limiting requests, excess: 20.130 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)"
Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729071 limiting requests, excess: 20.076 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)"
Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729073 limiting requests, excess: 20.055 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)"
Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729075 limiting requests, excess: 20.033 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)"
Oct 23 10:57:16 (MY SERVER NAME) nginx: 2023/10/23 10:57:16 [error] 13123#13123: *7729077 limiting requests, excess: 20.011 by zone "authlimit", client: 192.168.11.23, server: , request: "PROPFIND /login HTTP/1.1", host: "(MY SERVER NAME)"