May 29, 20233 yr Hey all, I have an old dell server that I got for free, a PowerEdge T410 i'm using as a plex / arr server. The drives were detected in the past with old 500gb drives, but new drives are not being detected or the old ones when they are unplugged and replugged. I'm having issues switching out a failed drive. I'm fine resetting the server so I tried but no drives are being detected now, even the older ones. Also the new 4tb drives I got are being read as 2.2 tbs, so I assume this is because it's an old raid card. I've posted the diagnostic data, could I get some recommendations on what I can do to get any drives detected? Will I have to get a new raid card? Any recommendations would be great, I've build desktops but nothing with servers or their hardware so new to this world of raid / sata etc. champion-diagnostics-20230529-1417.zip
May 29, 20233 yr Unraid IS NOT RAID, and RAID controllers are NOT recommended with Unraid. Also, some old controllers don't support more than 2.2TB. Sticky at the top of this same subforum:
May 30, 20233 yr Author I'm thinking of getting a h200 card Preflashed from eBay, will that be compatible with my system? I'll have five storage drives, one parody, and an SSD as cache. Is that card compatible with my motherboard and the case cables? And will it have enough slots?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.