June 23, 20233 yr Hello, today I setup my first unraid, after booting and entering the GUI there is no Network Connection. Unraid says eth0: Interface down. All Configurations (Static/DHCP) are not working, after Unraid finishes booting, the connection gets lost. PXE and Windows can succesfully connect to the Network. NIC: Realtek PCIe GbE Family Controller BIOS: AMI 5.27 UEFI 2.8; PI 1.7 CPU: Intel N95 Unraid: 6.12.1 Thanks for your help! kirsch-server-diagnostics-20230623-0535.zip
June 23, 20233 yr Author Quote No link being detected on the NIC. thanks for the fast response. Is this a problem with hardware support or drivers or some wrong configurations?
June 23, 20233 yr Community Expert 1 minute ago, Janosch said: thanks for the fast response. Is this a problem with hardware support or drivers or some wrong configurations? Assuming the Nic is working this suggests a problem with either the network cabling or the router. Are sure you have the network cable plugged into the right port and it is properly seated?
June 23, 20233 yr Author There is a Win 11 installed on the System, the nic with this OS works just fine. The Connection from the device to the router is managed by a switch, could this cause this problem? I tried two different cables and NW Ports and nothing chaged
June 23, 20233 yr Community Expert Solution Realtek drivers with Linux are kind of hit and miss, the model you're using usually works, but try with a different NIC if possible, ideally from Intel.
June 23, 20233 yr Author Thank you JorgeB, i tried a USB 3.0 Hub with a Network Port and that worked.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.