MarshallU Posted June 24, 2023 Share Posted June 24, 2023 Hey y’all, wanted to get some opinions on best route to take for some upgrades. I currently have 2 x 4 TB parity drives and 4 x 4 TB data drives. I have reached 100% utilization finally. I bought 3 x 12 TB drives last Black Friday but haven’t put them in. I would like to move the parity drives to a single 12 TB drive and also upgrade 2 of the data drives to 12 TB as well. What would be the best way to go about this upgrade? This will be my first hardware upgrade since starting up my server so I want to do it right. thanks all! Quote Link to comment
itimpi Posted June 24, 2023 Share Posted June 24, 2023 20 minutes ago, MarshallU said: Hey y’all, wanted to get some opinions on best route to take for some upgrades. I currently have 2 x 4 TB parity drives and 4 x 4 TB data drives. I have reached 100% utilization finally. I bought 3 x 12 TB drives last Black Friday but haven’t put them in. I would like to move the parity drives to a single 12 TB drive and also upgrade 2 of the data drives to 12 TB as well. What would be the best way to go about this upgrade? This will be my first hardware upgrade since starting up my server so I want to do it right. thanks all! The first step would be to replace the existing parity1 drive with 1 of the 12TB drives and rebuild parity on that drive. you mention replacing some of the other drives, but perhaps you should clarify exactly what mix of data drives you intend to end up with in the array. Quote Link to comment
MarshallU Posted June 24, 2023 Author Share Posted June 24, 2023 Okay that’s at least a start. If I go down to a single parity drive, I’ll have room for 5 data drives. So I could have the other two 12 TB + three of the 4 TB. That would be my preferred setup. So my two 4 TB parity drives will be no more, then the one 4 TB drive in the data array, do I just need to hard copy all the files off it to one of the 12 TB drives? Quote Link to comment
ConnerVT Posted June 24, 2023 Share Posted June 24, 2023 There are no files on your (former) 4TB Parity drives. They contain parity data, and aren't even formatted with a file system. Quote Link to comment
MarshallU Posted June 24, 2023 Author Share Posted June 24, 2023 Yeah I got that bit, but I will also have to give up one of my 4 TB drives for a 12 TB, would it be best to just copy the data off that 4 to the 12? Quote Link to comment
JorgeB Posted June 25, 2023 Share Posted June 25, 2023 Just do a normal replacement (after upgrading parity) and Unraid will rebuild the old data on the new disk. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.