June 30, 20233 yr Community Expert I have an ASRock X370 Professional Gaming motherboard with a built-in AQUANTIA 5 Gigabit LAN NIC. The problem is Unraid doesn't seem to recognize it. If I plug an ethernet cable into it neither of the network activity LEDs turn on. Do I have to manually install a driver? I'm running Unraid 6.11.5. Thank you!
June 30, 20233 yr Community Expert Settings for eth1: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full 5000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full 5000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Twisted Pair PHYAD: 0 Transceiver: internal MDI-X: Unknown Supports Wake-on: pg Wake-on: g Current message level: 0x00000005 (5) drv link Link detected: no driver: atlantic NIC is detected and has a driver installed, it just not detecting a link.
June 30, 20233 yr Author Community Expert I tried a couple different ethernet cables and ports on my switch (rebooting Unraid each time) but the NIC still isn't working properly. It won't pull an IP address from my router and I keep getting the red text at the bottom of Unraid "Interface Ethernet Port 1 is down. Check cable". Am I just unlucky and have a faulty NIC?
June 30, 20233 yr Community Expert The NIC will never work without detecting a link, but this sometimes could be driver related, suggest testing with a different OS to confirm.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.