June 30, 20233 yr Can anyone see what is causing the drive to fail? I've tried everything I can think of, and did an xfs repair, and it was fine for 2 days. It's driving me mad, as nothing is faulty, but if I reboot, it'll come up as unmountable. Would you zero the log? wopr-diagnostics-20230630-1728.zip
June 30, 20233 yr Community Expert Disk6 has a SMART failing now attribute, so it should be replaced, you are also having issues with disks 7 and 9, check/replace cables on those.
June 30, 20233 yr Community Expert Says disabled/emulated disk2 is currently mounted, but with connection problems on disks 7, 9, can't really emulate accurately. How are all these powered? Any splitters? More than 4 disks per power cable?
June 30, 20233 yr Author 1 minute ago, trurl said: Says disabled/emulated disk2 is currently mounted, but with connection problems on disks 7, 9, can't really emulate accurately. How are all these powered? Any splitters? More than 4 disks per power cable? Yeah it's currently mounted but I know if I reboot it will decide not to, as I had it last week. There are definitely splitters, and may well be more than 4 per cable, I'm not 100% sure.
June 30, 20233 yr Author 4 minutes ago, JorgeB said: Disk6 has a SMART failing now attribute, so it should be replaced, you are also having issues with disks 7 and 9, check/replace cables on those. Power issues? I added 3 drives and now think it was a bad idea! Which attribute? I don't really have the budget to replace it right now.....
June 30, 20233 yr Community Expert 1 minute ago, JorgeB said: Disk6 has a SMART failing now attribute, so it should be replaced I think you mean disk2. Fix the connections then post new diagnostics so we can see if emulated disk2 is still mountable.
June 30, 20233 yr Author 2 minutes ago, trurl said: Do any other disks have SMART warnings 👎 on the Dashboard page? Disk 11 says 199 UDMA CRC error count 0x003e200200000 Old age Always Never 6
June 30, 20233 yr Author 3 minutes ago, trurl said: I think you mean disk2. Fix the connections then post new diagnostics so we can see if emulated disk2 is still mountable. When you say fix... replace? Because the breakout cable DIsk 1 & 2 was connected to was swapped last week when I had the same issue.... so could it be the power cable, or should I swap the drive so it connects to a different card?
June 30, 20233 yr Community Expert 14 minutes ago, folic86 said: There are definitely splitters, and may well be more than 4 per cable, I'm not 100% sure I would start with these
June 30, 20233 yr Author 1 minute ago, trurl said: I would start with these Not entirely sure that I have spares, so that may take a while. I'll be back.
June 30, 20233 yr Community Expert 49 minutes ago, trurl said: I think you mean disk2. Yep, sorry, disk2: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 184 End-to-End_Error -O--CK 099 099 099 NOW 1
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.