I am seeing errors on the dashboard for 2 of my drives. The Parity drive and a SSD. I think it was just bad cables, which I have replaced. By it is still saying error. I think the Parity could be just the age of the drive. Any thoughts?

 

I have attached an image of the dashboard, the smart info for the parity drive and the diagnostics file.

 

Thanks

oasis-smart-20230702-0900.zip oasis-diagnostics-20230702-0913.zip

Good chance the error was a CRC error which indicates a connection issue caused a failed transfer initiating a repeat,   Chances are you changing canoes has resolved the issue.  Since CRC errors are recorded on the drive and never rest to 0, if you click on the thumbs down symbol and select Acknowledge from the displayed menu Unraid will only warn you again if the value increases.   Occasional CRC errors are nothing to worry about but if they occur regularly you want to look into it as they slow down transfer speeds. 

24 minutes ago, itimpi said:

Good chance the error was a CRC error which indicates a connection issue caused a failed transfer initiating a repeat,   Chances are you changing canoes has resolved the issue.  Since CRC errors are recorded on the drive and never rest to 0, if you click on the thumbs down symbol and select Acknowledge from the displayed menu Unraid will only warn you again if the value increases.   Occasional CRC errors are nothing to worry about but if they occur regularly you want to look into it as they slow down transfer speeds. 

Spot on thanks mate. I couldn't understand why the thumbs down was still there, didn't realise you had to acknowledge. Thanks again.