July 13, 20232 yr Hello, I'm running latest unRAID version (6.12.1). The hardware has two 2.5GbE nics, one of which is connected to a switch on a 1GbE port. I ran Windows 11 on this server prior to installing unRAID and I got full 1000Mbps on it. However, in unRAID, I see that my ethernet port is tied to a bridge (br0) and br0 is running on 100Mbps only, instead of 1000Mbps. I did not fiddle with network settings, everything is default. Here are the screenshots of my setup. NOTE: I'm also running a docker container, but no VMs. NOTE: I've checked the cable and the switch port. They report 1000Mbps on my Macbook and windows properly. How can I get br0 / eth1 to run on full 1000Mbps connection? Thanks in advance!
July 13, 20232 yr Author Solution I found that the port on the switch was yellow. I put the cable in another port and green light came on. And now I get 1000 Mbps.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.