July 19, 20232 yr Recently my Unraid box failed to boot, and I couldn't even get to the BIOS. Some hardware struggles later, I ended up replacing the cpu, ram, and motherboard. I also discovered that unfortunately the original boot flash was completely unreadable. I made a new boot flash, and have the new hardware up and running, and it all seems healthy. However, I suspect that the drives are not in the same order that they were on the previous motherboard. I also don't recall if I was running Unraid v6 or v5 previously. Is it possible to recreate the volumes without having a copy of the previous config? bunker-diagnostics-20230719-1452.zip
July 19, 20232 yr Community Expert Solution You might find this section of the online documentation to be of use.
July 19, 20232 yr Author Thanks - this seems to have worked and all the volumes (at least as far as I remember) are there again.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.