July 21, 20232 yr Hello, (Please excuse me if I am posting in the wrong sub) Recently, my check resulted in 1350 errors, I ran again and corrected it. After that, I stopped the array and clean shutdown. After a few days, I booted up the tower and ran parity check again. PANIC: 2749 error at 70% progress now. Could you please advise which steps to extract a log to post here for your help to advise where the problem from (sorry, I am a newbie...) Are qbitorrent and plex service causing these? I am planning to replace all the SATA cables as well but not sure if it will solve the problem. Thank you in advance.
July 24, 20232 yr Author On 7/21/2023 at 4:51 PM, JorgeB said: ATA errors for disk1, start by replacing those cables. I replaced that cable, run check with repair and resulted in errors corrected. I then run a second check, done with 0 error. Attached is the diag after the 1st and the 2nd check. Am I good now? 2nd tower-diagnostics-20230724-0827.zip 1st tower-diagnostics-20230722-1620.zip
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.