July 22, 20232 yr Hi, I post here after multiple search, i found some things but in old unraid version. I'm in 6.12.3. So my problem is : I put my Inspur Intel X540-T2 nic in my server and she is appear in IOMMU (i can passthrough) but she is absent in network config. When i type lshw -c network it say UNCLAIMED. I saw things about modprobe blacklist can anyone can say me if i need to do it? Thanks a lot and have a good day ! t320-diagnostics-20230722-1208.zip
July 22, 20232 yr Community Expert I had something similar when installing more nics. I got through it by checking the iommu boxes on all the nics I do not want to use for unRAID itself. After the obligatory reboot, I was able to see the nic I was looking for. It was almost like my system only wanted to display 2 nics in the network config section.
July 22, 20232 yr Author Hi! I was confronted to this issue last time with another server but this time i only have 2 other ethernet interface integrated on the mb and i can't check them in iommu because one is my main nic. I will try on kvm ui and say if it work thks
July 23, 20232 yr Author On 7/22/2023 at 3:27 PM, Veah said: I had something similar when installing more nics. I got through it by checking the iommu boxes on all the nics I do not want to use for unRAID itself. After the obligatory reboot, I was able to see the nic I was looking for. It was almost like my system only wanted to display 2 nics in the network config section. Tried, and i can't..
July 24, 20232 yr Community Expert Can you see it from command line by using ip a? Here's a link to some ifconfig commands to set your IP. Maybe some old fashioned cli is what you need. https://www.thegeekstuff.com/2009/03/ifconfig-7-examples-to-configure-network-interface/ Unfortunately I don't know enough to do more than point you where I would look. Good luck.
July 25, 20232 yr Author On 7/24/2023 at 2:54 AM, Veah said: Can you see it from command line by using ip a? Here's a link to some ifconfig commands to set your IP. Maybe some old fashioned cli is what you need. https://www.thegeekstuff.com/2009/03/ifconfig-7-examples-to-configure-network-interface/ Unfortunately I don't know enough to do more than point you where I would look. Good luck. Hi! No unfortunately i don't see another nic. After many search it seem to be a problem relative to drivers of my card, i buy another 10gb nic... Thank's for your help !
July 26, 20232 yr Community Expert Get an Intel. All the others can be a bit of a gamble especially with freebsd type things like pfsense. I use a 540 that showed up with no issue and they are not too pricey these days.
July 26, 20232 yr Author 4 hours ago, Veah said: Get an Intel. All the others can be a bit of a gamble especially with freebsd type things like pfsense. I use a 540 that showed up with no issue and they are not too pricey these days. Yep it's a Inspur Intel X540-T2 on windows intel driver work and on VyOS it works fine too but yep i buy a intel intel and problem will be "solved" . Maybe one day somebody with more competence than me will found the free solution X) Many thanks for your help aswell !
July 15, 20241 yr I got an similar issue. Intel X520 is showing in Devices but not in Network Settings. Switch is showing link.. Any Soloution to this? Thanks & KR
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.