August 30, 201114 yr Unsure if this is the norm, or because of V5 beta 12 Upgraded parity disk from 2TB to 3tb (took all weekend) After everything was fine (rebooted etc) Removed disk3 (500GB) and replaced it with old parity disk (2tb) The 500GB had not much on it (approx 100-300GB) Starting to rebuid but its taking ages (see below) Total size: 2 TB Current position: 11.43 GB (1%) Estimated speed: 11.31 MB/sec Estimated finish: 2930 minutes Is this normal ? Server is a hp proliant microserver with 2GB of ram. Attached is the syslog. syslog.txt
August 30, 201114 yr A little more info on the hp More then 4 drives? If so add on sata card? Are you using the cd bay for a disk? If so, are you using a hacked bios? It seems slowish to me. But that might be the norm for that unit
August 30, 201114 yr Author A little more info on the hp More then 4 drives? If so add on sata card? Are you using the cd bay for a disk? If so, are you using a hacked bios? It seems slowish to me. But that might be the norm for that unit Hi John, 4 Drives in total WAS: 2TB Parity,2TB Data,1TB Data,500GB Data NOW: 3TB Parity,2TB Data,2TB Data(from above parity), 1TB Data Using hacked bios, no sata card,nothing in CD bay (yet!) running top (see attached txt file) its not very processor intensive top.txt
Archived
This topic is now archived and is closed to further replies.