armin0012002 Posted August 1, 2023 Share Posted August 1, 2023 Hi i changed my drive and rebuild keep going on pause can someone pls check my diagnostic log tower-diagnostics-20230801-2142.zip Quote Link to comment
Solution JorgeB Posted August 1, 2023 Solution Share Posted August 1, 2023 Check settings for the parity check plugin (or try uninstalling it to confirm if it's that). Quote Link to comment
armin0012002 Posted August 1, 2023 Author Share Posted August 1, 2023 thanks I changed everything on no and its running for now Quote Link to comment
itimpi Posted August 1, 2023 Share Posted August 1, 2023 3 hours ago, armin0012002 said: thanks I changed everything on no and its running for now Looking at the diagnostics the check was paused because mover was running. Mover and parity check very badly affect the performance of each other so you do not normally want them running at the same time. Any idea why mover was running? If you have notifications enabled then you should have received one giving the reason why the check was paused. I also noticed the following: Aug 1 21:30:46 Tower kernel: critical medium error, dev sdl, sector 1325225704 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 3 Aug 1 21:30:46 Tower kernel: Buffer I/O error on dev sdl, logical block 165653213, async page read which probably needs looking at. Quote Link to comment
armin0012002 Posted August 1, 2023 Author Share Posted August 1, 2023 13 minutes ago, itimpi said: Looking at the diagnostics the check was paused because mover was running. Mover and parity check very badly affect the performance of each other so you do not normally want them running at the same time. Any idea why mover was running? If you have notifications enabled then you should have received one giving the reason why the check was paused. I also noticed the following: Aug 1 21:30:46 Tower kernel: critical medium error, dev sdl, sector 1325225704 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 3 Aug 1 21:30:46 Tower kernel: Buffer I/O error on dev sdl, logical block 165653213, async page read which probably needs looking at. yes I noticed that mover now clear my cache and im trying to stop the array but recently I noticed I keep getting this error Aug 2 02:08:32 Tower root: rmdir: failed to remove '/mnt/user': Device or resource busy Aug 2 02:08:32 Tower emhttpd: shcmd (2058): exit status: 1 Aug 2 02:08:32 Tower emhttpd: shcmd (2060): /usr/local/sbin/update_cron Aug 2 02:08:32 Tower emhttpd: Retry unmounting user share(s)... Aug 2 02:08:37 Tower emhttpd: shcmd (2062): /usr/sbin/zfs unmount -a Aug 2 02:08:37 Tower emhttpd: shcmd (2063): umount /mnt/user Aug 2 02:08:37 Tower root: umount: /mnt/user: target is busy. Aug 2 02:08:37 Tower emhttpd: shcmd (2063): exit status: 32 Aug 2 02:08:37 Tower emhttpd: shcmd (2064): rmdir /mnt/user tower-diagnostics-20230802-0206.zip Quote Link to comment
armin0012002 Posted August 1, 2023 Author Share Posted August 1, 2023 never mind . ssh ruining that was issue Quote Link to comment
armin0012002 Posted August 1, 2023 Author Share Posted August 1, 2023 Quote Aug 1 21:30:46 Tower kernel: critical medium error, dev sdl, sector 1325225704 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 3 Aug 1 21:30:46 Tower kernel: Buffer I/O error on dev sdl, logical block 165653213, async page read regarding to this how to know which drive it is? Quote Link to comment
itimpi Posted August 1, 2023 Share Posted August 1, 2023 You should be able to see on the Main tab which drive is ‘sdl’. Quote Link to comment
armin0012002 Posted August 1, 2023 Author Share Posted August 1, 2023 4 minutes ago, itimpi said: You should be able to see on the Main tab which drive is ‘sdl’. this is drive its going under preclear atm do you reckon I cant use this ? #################################################################################################### # Unraid Server Preclear of disk WD-WCC4E0AN1F56 # # Cycle 1 of 1, partition start on sector 64. # # # # Step 1 of 5 - Pre-read in progress: (44% Done) # # # # # # # # # # # # ** Time elapsed: 8:26:43 | Current speed: 70 MB/s | Average speed: 58 MB/s # # # #################################################################################################### # Cycle elapsed time: 8:26:44 | Total elapsed time: 8:26:45 # #################################################################################################### #################################################################################################### # S.M.A.R.T. Status (device type: default) # # # # ATTRIBUTE INITIAL STATUS # # Reallocated_Sector_Ct 96 - # # Power_On_Hours 27504 - # # Temperature_Celsius 32 - # # Reallocated_Event_Count 6 - # # Current_Pending_Sector 1 - # # Offline_Uncorrectable 0 - # # UDMA_CRC_Error_Count 0 - # # # # # #################################################################################################### # # #################################################################################################### Quote Link to comment
itimpi Posted August 1, 2023 Share Posted August 1, 2023 You probably want to let it run a bit further. The reallocated sectors not being 0 is not a good sign but as long as it stays stable the drive could be OK. Also worrying is the Pending Sectors value not being 0 although with any luck in will go back to 0 when the sector is next written. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.