August 10, 20232 yr Long story short,,, the drive worked for a few years, then got the red X. Replaced the drive, same issue with new one... turned out to be my power supply, replaced that, smooth sailing with the new drive. The old drive (WD 10tb) went into another system for a check up,, read and wrote just fine, extended SMART showed no errors/warnings. Formatted without issue. Tried to re install the WD to unraid, it's not recognized. Checked the BIOS, it's not listed..... Plugged it in via USB external dock, appeared right away in unassigned devices. I formatted via the GUI, no issues. Installed the disk again internally, not recognized. I swapped SATA cables and ports for known good ones, nothing. Swapped power cables, nothing. Tried it on the LSI card, nothing. Still doesn't appear in BIOS. Went back to external, pops right up. Any idea what I'm missing? tower-diagnostics-20230810-1204.zip
August 10, 20232 yr Community Expert Solution Make sure it's not the SATA 3.3v pin issue, google that.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.