Using 6.11.3

 

I just moved my system from an ASUS B85M-E motherboard with an i7 4790 to an MSI PRO B550-VC with a Ryzen 5 4600G processor.

There were only 6 SATA ports on the old board, so I was using a 2 port Asmedia ASM1061 card for 2 of my hard drives. This was working just fine, but I can never leave well enough alone; so here we are.

 

It seemed like everything moved perfectly to the new system, but then I got a CRC error on an SSD plugged into port 8 on the board. That's when I checked the syslog and noticed some errors. At that time it was only the one port giving errors in the log. I tried moving that drive to another cable and port on the motherboard, but the error persisted on port 8. Then I replaced the SATA cable for port 8 and moved some drives around in the chassis. Now I have errors on ports 7 and 8.

 

I believe sdh and sdi are port 7 and 8 on the motherboard.

 

 

 

 

I'm going to update the bios on this motherboard, but I'm not sure what to do to troubleshoot these errors.

Any help is very much appreciated.

unraid-diagnostics-20230811-1751.zip

Edited August 11, 20232 yr by 4l65e
added diagnostics zip

Bios update didn't change the behavior, however I'm not getting the errors in syslog after moving the 2 SSDs to a couple of the other 6 ports.

 

I'm not sure what SATA controller MSI used for ports 7 and 8, but there's something weird with it.

If those ports work well with the disks leave it like like, sometimes some devices are more peculiar.