nephh Posted August 24, 2023 Share Posted August 24, 2023 (edited) Hi, I'm having problems with my home automation with unRaid on my NUC9 Ghost Canyon. I use zigbee2mqtt with Home Assistant a Zigbee USB dongle (SONOFF ZBDongle-E). The Zigbee USB key is plugged directly into one of the two front ports of the NUC. Initially, I had a VM with HassOS but zigbee2mqtt crashed regularly. I tried to make a VM of Debian, install my three services with docker compose. It works... but the Zigbee USB stick drops at least once a day. Sometimes my Zigbee checkbox gets unchecked in the VM, sometimes it's still checked but inaccessible in the VM, which crashes zigbee2mqtt. If I force stop the VM and restart it, it usually works again. But it's not a solution to do this every day How to fix this problem ? My diagnostic report is attached, Thanks for your help unRaid version: 6.12.3 unRaid hardware: NUC9i5QNB / CPU i5-9300H / RAM 16 GB / Mellanox ConnectX-3 Syslog: Aug 23 17:06:43 Tower kernel: usb 1-10.1: reset full-speed USB device number 10 using xhci_hcd Aug 23 19:47:40 Tower kernel: usb 1-10-port1: disabled by hub (EMI?), re-enabling... Aug 23 19:47:40 Tower kernel: usb 1-10.1: USB disconnect, device number 10 Aug 23 19:47:40 Tower kernel: usb 1-10.1: new full-speed USB device number 11 using xhci_hcd Aug 23 19:47:40 Tower kernel: cdc_acm 1-10.1:1.0: ttyACM0: USB ACM device Aug 24 11:31:13 Tower kernel: usb 1-10-port1: disabled by hub (EMI?), re-enabling... Aug 24 11:31:13 Tower kernel: usb 1-10.1: USB disconnect, device number 11 Aug 24 11:31:13 Tower kernel: usb 1-10.1: new full-speed USB device number 12 using xhci_hcd Aug 24 11:31:13 Tower kernel: cdc_acm 1-10.1:1.0: ttyACM0: USB ACM device tower-diagnostics-20230824-1207.zip Edited August 24, 2023 by nephh Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.