Hi, I already tried fresh install and copy config to it and I already tried resetting my router.  Both don't even fix my problem and I ask around for help but nothing as well. This is my second post asking for help if someone know what is happening here. I can't access apps community to update and etc.

 

paradyne-diagnostics-20230911-1418.zip

Rename/delete /boot/config/network.cfg to go back to LAN default DHCP and post new diags after a reboot.

4 hours ago, JorgeB said:

Rename/delete /boot/config/network.cfg to go back to LAN default DHCP and post new diags after a reboot.

I need to delete manually from usb right? Or can just delete using webgui terminal?

37 minutes ago, akhisyahmi said:

Or can just delete using webgui terminal?

You can, or even over SMB, if the flash drive is shared.

13 minutes ago, JorgeB said:

You can, or even over SMB, if the flash drive is shared.

Hi, thank you sir fixed it but my network settings got reset as well. I can change it back as usual right?

35 minutes ago, JorgeB said:

You can, or even over SMB, if the flash drive is shared.

Found out what seem to be the problem. My direct PC to NAS ethernet make unraid network unreachable if I set static IP for it. Any idea how to get it to work?

 

 

For now using automatic IP not working.

Edited September 11, 20232 yr by akhisyahmi

Don't set a gateway for that NIC, also using a different subnet is usually recommended.

6 minutes ago, JorgeB said:

Don't set a gateway for that NIC, also using a different subnet is usually recommended.

Do you have any picture or instruction to follow? A bit dumb in doing this. I use static before but it broke unraid network. I don't know another way to do it.

 

So I just set it to static and use IP address. For gateway just put 0?

8 minutes ago, akhisyahmi said:

For gateway just put 0?

Leave the gateway blank.

36 minutes ago, JorgeB said:

Leave the gateway blank.

Thank you very much. Fixed all my problem. Have a nice day sir. Sorry for the trouble