September 16, 20232 yr I recently updated my server to 6.12.4, but it seems to hang after 1-2 days of normal operation. I've rebooted it to safe mode while running a parity check in maintenance mode, which was stable for 3 days. It seems like it may be a plug-in issue but can't find the root. I've attached diagnostics for referral. Many thanks in advance! hk-homelab-diagnostics-20230915-1548.zip
September 16, 20232 yr Community Expert Please note that virtualizing Unraid is not officially supported, but enable the syslog server and post that after a crash.
October 5, 20232 yr Author Hi, my apologies for the delay. It took some time for me to address the issue. My SD card died, so I found a replacement. After which, I also fixed up having the docker system in folder format in a ZFS drive and changed it to a docker BTRFS image. Unfortunately, the system still hangs after ~48 hours. I've attached my diagnostics and log for review. Many thanks for your help! hk-homelab-diagnostics-20231002-1040.zip syslog-127.0.0.1.log
October 5, 20232 yr Community Expert Log is full of these: Oct 3 05:04:14 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 18390 exited on signal 9 (SIGKILL) after 1087.393322 seconds from start Oct 3 05:04:17 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 31999 exited on signal 9 (SIGKILL) after 347.663467 seconds from start Oct 3 05:04:18 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 32590 exited on signal 9 (SIGKILL) after 312.558619 seconds from start Oct 3 05:04:24 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 32723 exited on signal 9 (SIGKILL) after 290.137874 seconds from start Oct 3 05:04:30 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 32771 exited on signal 9 (SIGKILL) after 269.063989 seconds from start Oct 3 05:04:33 HK-HomeLab php-fpm[13709]: [WARNING] [pool www] child 32821 exited on signal 9 (SIGKILL) after 268.380087 seconds from start They can sometimes be caused by some containers, try running with docker service disabled for some time, if no issues start enabling the containers one by one.
October 5, 20232 yr Author Thank you for the tip on that. I’ll give that a try and report back soon. Another thing I notice is that when I do a Macrium backup from my laptop to my unRAID server, the GUI hangs until the backup is finished. I checked my CPU and mem load it never goes above 60%. I wonder if it can be I/O or network issue? But then, the max transfer rate is only around 90MB/s on a 10GBps network & SSD cache.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.