I am setting up a new system based on Asus Pro WS W680M-ACE SE motherboard with an LSI 9240-8i  FW:P20 IT Mode controller.

I've seen some UnRaid forum posts with successful UnRaid implementations of this mobo and so I got everything working correct except the last part adding the LSI controller and few SAS drives.   I get these errors and not sure if is something missing or needs changing in my BIOS?  Despite these errors that continuously run in my syslog (tail -f /var/log/syslog) I can see the drives and assign them and even do a parity sync right now. But with these constant errors in the background

 

UPDATE: Researching this -->

            
[ 1005.824110] pcieport 0000:00:01.0: AER: Corrected error received: 0000:01:00.0
[ 1005.824125] mpt3sas 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1005.824130] mpt3sas 0000:01:00.0:   device [1000:0072] error status/mask=00000001/00002000
[ 1005.824135] mpt3sas 0000:01:00.0:    [ 0] RxErr                 
[ 1005.837359] pcieport 0000:00:01.0: AER: Multiple Corrected error received: 0000:01:00.0
[ 1005.837379] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1005.837384] pcieport 0000:00:01.0:   device [8086:460d] error status/mask=00001000/00002000
[ 1005.837389] pcieport 0000:00:01.0:    [12] Timeout               
[ 1005.837395] mpt3sas 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1005.837399] mpt3sas 0000:01:00.0:   device [1000:0072] error status/mask=000000c1/00002000
[ 1005.837403] mpt3sas 0000:01:00.0:    [ 0] RxErr                 
[ 1005.837407] mpt3sas 0000:01:00.0:    [ 6] BadTLP                
[ 1005.837410] mpt3sas 0000:01:00.0:    [ 7] BadDLLP               
[ 1005.837412] mpt3sas 0000:01:00.0: AER:   Error of this Agent is reported first
[ 1005.843141] pcieport 0000:00:01.0: AER: Corrected error received: 0000:01:00.0
[ 1005.843162] mpt3sas 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1005.843167] mpt3sas 0000:01:00.0:   device [1000:0072] error status/mask=00000001/00002000
[ 1005.843172] mpt3sas 0000:01:00.0:    [ 0] RxErr                 
[ 1005.862001] pcieport 0000:00:01.0: AER: Corrected error received: 0000:01:00.0
[ 1005.862018] mpt3sas 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1005.862022] mpt3sas 0000:01:00.0:   device [1000:0072] error status/mask=00000001/00002000
[ 1005.862027] mpt3sas 0000:01:00.0:    [ 0] RxErr         

 

      

Edited September 18, 20232 yr by DivideBy0

Try this first:

https://forums.unraid.net/topic/118286-nvme-drives-throwing-errors-filling-logs-instantly-how-to-resolve/?do=findComment&comment=1165009

 

LOL, you fast, you beat me to it

 

So yeap that line in syconfig fixed it

 

Should I be worried about this error?

 

[  179.871820] mpt3sas 0000:01:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM

 

Edited September 18, 20232 yr by DivideBy0