Hello, this issue started last night when plex died while watching an ISO. I went to look at the unraid interface and that was unresponsive so I gave the system a re-boot and I was able to get into the GUI and start the array it would run for all of 3-4 min before another crash. After trying it another time and a having the same results. I started it in maintenance mode and it seems to be running just fine for 30+ min so that leads me to believe that the USB failing isn't the issue. The system itself stays running when this crash happens so I assume it is not hardware related. (like RAM or CPU dying). I did update to the latest stable Unraid OS but that didn't seem to make a change. I do have an existing issue with my second parity drive throwing an SMART error (It looks like throughput issues nothing that made me want to pitch the drive) but I wouldn't think that would be the issue unless that can cause issues with an HBA.

 

I will upload my diagnostics in another post when I am able.

In addition to the diags enable the syslog server and post that after a crash.

Started it just now and all issues seem to have gone away. I went ahead and replaced that disk as well.

Thank you for the reply.

Looks like the problem persists here is my diags with syslog turned on.

Thanks!

tower-diagnostics-20231013-2102.zip

Also post the persistent syslog, it doesn't come with the diags.

syslog

Oct 13 21:07:10 Tower kernel: macvlan_broadcast+0x10a/0x150 [macvlan]
Oct 13 21:07:10 Tower kernel: ? _raw_spin_unlock+0x14/0x29
Oct 13 21:07:10 Tower kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan]

Macvlan call traces will usually end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).

Okay I set this. I hope that was the issue!

Thank you!