Visuals Posted October 20, 2023 Share Posted October 20, 2023 Hey guys, im currewntly struggling with a problem that i dont know how to fix it. i had the problem that i most probaly had not enough power delivered to all the drives, therefore drive 14 went offline. i fixed now the power delivery problem but when i reboot i see two drives with Unmountable: Wrong or no file System and one drive wich is additionally offline. because i only have two parity disks trhis would meand that i have data loss right? i attached the diagnostics in here. hopefully someone can help me guide a bit to see how i can fix it. Thanks a lot for your hel. thor-diagnostics-20231020-1347.zip Quote Link to comment
JorgeB Posted October 20, 2023 Share Posted October 20, 2023 Only two drives are disabled, the other one is just unmountable, check filesystem on all 3 unmountable disks, run it without -n. Quote Link to comment
Visuals Posted October 20, 2023 Author Share Posted October 20, 2023 thanks a lot for your swift reply. i tried to run the command without -n on drive 7 and i got this as a result: Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... Log inconsistent (didn't find previous header) failed to find log head zero_log: cannot find log head/tail (xlog_find_tail=5) ERROR: The log head and/or tail cannot be discovered. Attempt to mount the filesystem to replay the log or use the -L option to destroy the log and attempt a repair. Quote Link to comment
Solution itimpi Posted October 20, 2023 Solution Share Posted October 20, 2023 You need to run with -L (and without -n). Quote Link to comment
Visuals Posted October 20, 2023 Author Share Posted October 20, 2023 this worked so far thanks a lot. To bring the diabled drives online i habe to switch them to "no disk" and then add the disk again that a parity rubuild is getting started, right? is there a easier way to do that? Quote Link to comment
JorgeB Posted October 20, 2023 Share Posted October 20, 2023 2 minutes ago, Visuals said: To bring the diabled drives online i habe to switch them to "no disk" and then add the disk again that a parity rubuild is getting started, right? Correct, you can do both at the same time, make sure emulated disks are mounting and contents look correct before doing it, also look for lost+found folders. Quote Link to comment
itimpi Posted October 20, 2023 Share Posted October 20, 2023 1 minute ago, Visuals said: this worked so far thanks a lot. To bring the diabled drives online i habe to switch them to "no disk" and then add the disk again that a parity rubuild is getting started, right? is there a easier way to do that? The procedure for rebuilding a disk back to itself is covered here in the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page. The Unraid OS->Manual section in particular covers most features of the current Unraid release. However if any other drive is showing as unmountable (even if it is being emulated) you want to go through the process for repairing the drive before attempting a rebuild. The rebuild process just ends up with what shows before starting the rebuild. Best to try repairing an emulated drive to see if that succeeds before over-writing the associated physical drive. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.