javier911 Posted September 21, 2011 Share Posted September 21, 2011 This is my second problem with a similar result, but this time it happened during a simple Windows XP file copy, the result is basically the same as in my last post: http://lime-technology.com/forum/index.php?topic=14751.msg139521 I was copying a directory of mostly photos, about 40GB. After awhile I went to check and copy had failed, urnaid server was then unresponsive but not totally crashed. I could attempt to connect to the webserver but pages will never load, also attempt to telnet but I'd only get to the "connected... escape character.." prompts. With no other choice I forced it to power off with the power switch, and started it up again. Problem this time is I don't have any previous logs, the syslog file simply starts when I rebooted. I found nothing old in /var/log, are there previous logs stored elsewhere? My first problem, the one in my previous post I noted above, was perhaps somewhat of a uncommon case with using FileZilla and 3 transfers writing to the array, which was worked around by dropping to 2 transfers. This time however it's a completely normal and possibly very common case that really shouldn't crash the server. So the question is becoming, not necessarily how to fix these but more should I give up on this? I basically thought that given some exceptions unraid was pretty widely compatible with hardware and a good semi-DIY setup. Am I wrong to expect reliability on my own hardware? Is unraid really not so reliable unless you buy a pre-built box? Please note I am not complaining, trying to insult, I merely would like some honest opinions so I don't keep working on this box and having even basic use cause crashes, thinking I can maybe do something about it when I cannot. I realize I could build a new system based on the exact recommended hardware, but for me that would be going too far cost-wise. I built my box with mostly existing hardware, only bought the recommended case and cages to support a lot of drives as I had planned to run this server for some time, adding drives as needed. Quote Link to comment
dgaschk Posted September 21, 2011 Share Posted September 21, 2011 Attach the current syslog. Zip it if needed. Please list the system specs. Quote Link to comment
javier911 Posted September 21, 2011 Author Share Posted September 21, 2011 Gigabyte GA-MA785GM-US2H 2GB DDR2 RAM (2x1 Corsair) 1x Hitachi and 3x WD EARS (one not in array) Antec Basiq 550 Plus syslog1.txt Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.