October 27, 20232 yr Hi. I turned off my unraid server for over a week and when I got back and try to start the array, One of the drive showing "Wrong". I didn't even touch anything other than turning on the server and start the array. I searched around and created new config as suggested. Now the drive is showing "Unmountable: Unsupported or no file system". I have tried changing the cable, but still having the issue. Can anyone help me on this? What went wrong? I have 2x12TB Toshiba disk, 1x480GB SSD for caching. No parity. I am still playing around with unraid and trying to understand it first before going full setup. stor-diagnostics-20231027-1119.zip
October 27, 20232 yr Community Expert 4 hours ago, johnroe said: I searched around and created new config as suggested That may not have been a good idea, should have posted the diags at that time. Start the array in maintenance mode and post the output of: xfs_repair -v /dev/md2p1
October 28, 20232 yr Author 21 hours ago, JorgeB said: That may not have been a good idea, should have posted the diags at that time. I found many people had this issue, so I thought it is a common problem I am experiencing. Unfortunately the solution didn't fixed mine. 21 hours ago, JorgeB said: Start the array in maintenance mode and post the output of: xfs_repair -v /dev/md2p1 6 hours running and counting. Is this normal?
October 28, 20232 yr Community Expert 3 hours ago, johnroe said: 6 hours running and counting. Is this normal? No, and not a good sign, if you don't have a backup you can try using UFS explorer to see if it can recover the data, there's a free trial that should show if anything is recoverable.
October 28, 20232 yr Author 47 minutes ago, JorgeB said: No, and not a good sign, if you don't have a backup you can try using UFS explorer to see if it can recover the data, there's a free trial that should show if anything is recoverable. I have the backup online. What I am afraid more is this issue will happen again in the future. getting the data back will take days. Any idea why this happened, or probably caused it?
October 28, 20232 yr Community Expert 17 minutes ago, johnroe said: Any idea why this happened, or probably caused it? Not without the original diags, if it happens again post new diags before rebooting or doing anything else.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.