madmanx Posted November 5, 2023 Share Posted November 5, 2023 Hi so just today I had a partiy check and noticed my system running extra slow and then I noticed some of my docker containers werent working then it finally just crashed and so I decided to restart the server to see if that helped. Docker came back but certain dockers like authelia wont start and also one of the discs was disabled. Here is my diagnostic. I was thinking to unassign my drive in maintenance mode and then reassign to build it back up but the amount of errors fix common problems is giving me I am worried this might cause more issues. Thanks for the assistance titan-diagnostics-20231105-1622.zip Quote Link to comment
Solution itimpi Posted November 5, 2023 Solution Share Posted November 5, 2023 Lots of the array drives started simultaneously getting errors and they do not show up in the SMART reports so they went offline. This suggests a problem with something they share such as power or the HBA they are attached to. Quote Link to comment
madmanx Posted November 5, 2023 Author Share Posted November 5, 2023 6 minutes ago, itimpi said: Lots of the array drives started simultaneously getting errors and they do not show up in the SMART reports so they went offline. This suggests a problem with something they share such as power or the HBA they are attached to. Thank you. So if I were to replace the HBA would I have to worry about the order I have connected them. I can remmeber this being an issue a long while ago. Its a pretty old HBA so maybe its failing. As for the PSU i can replace that Quote Link to comment
itimpi Posted November 5, 2023 Share Posted November 5, 2023 1 minute ago, madmanx said: Thank you. So if I were to replace the HBA would I have to worry about the order I have connected them. I can remmeber this being an issue a long while ago. Its a pretty old HBA so maybe its failing. As for the PSU i can replace that Order is not relevant as disks are recognised by serial number not by where they are connected. it is worth checking it not something more obvious such as the HBA no longer being firmly seated in its motherboard slot. Quote Link to comment
madmanx Posted November 5, 2023 Author Share Posted November 5, 2023 Just now, itimpi said: Order is not relevant as disks are recognised by serial number not by where they are connected. it is worth checking it not something more obvious such as the HBA no longer being firmly seated in its motherboard slot. Will do, just in case I have to replace with something else, I was literally in the middle of building a backup server which I bought a LSI 9300 as truenas has better support for that, would you recommend something similar or can I use older generation LSI card? Quote Link to comment
JorgeB Posted November 6, 2023 Share Posted November 6, 2023 LSI HBAs are fine, 92xx or newer. Quote Link to comment
madmanx Posted November 19, 2023 Author Share Posted November 19, 2023 On 11/6/2023 at 9:47 AM, JorgeB said: LSI HBAs are fine, 92xx or newer. Thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.