November 8, 20232 yr Hello, i have one big problem with my server, i have alwayls try to change file type system, rebuild my unraid server or orther trick but it's doesn't work, i don't understand why, that appears alwalys one or two week after i recreate the array. if someboy can help me or someboy have one or two idea thank you in advance Sorry for me english i'm native french tower-diagnostics-20231108-2328.zip
November 9, 20232 yr Community Expert If the same filesystem keeps getting corrupt suggest backup and re-format, if it keeps happening there could be an underlying hardware issue, like bad RAM.
November 9, 20232 yr Author Actually i can't format my disk if i try to click on format will create a file system in all Unmountable disks. Yes, I want to do this. my server just do nothing, i found that in disk information. Thank you for your help ! I will go try to remove ram and check if the problem come again
November 9, 20232 yr Community Expert It should format after a reboot, note that formatting deletes all data in that disk.
November 28, 20232 yr Author Hello, I removed the problematic ram, run ram test without problem. Fortunately, this problem returns, my shares have jumped I haven't restarted my server yet but it will display the same message I don't understand why... tower-diagnostics-20231127-2055.zip
November 28, 20232 yr Community Expert There's no syslog in the diags, see if you can get just the syslog from Tools.
November 28, 20232 yr Author I recovered it with the tools if that can help you tower-syslog-20231128-1722.zip
December 7, 20232 yr Author Sorry for the time i take to check but now, i me disk is not longer unmountable or i don't the message no file system, but i can't read the information on the disk now tower-diagnostics-20231207-0817.zip
December 7, 20232 yr Community Expert Looks like there are ATA errors for multiple disks, but reboot to clear the logs and post new diags after array start.
December 7, 20232 yr Author after the reboot, the disk works normally but log full, I don't think the system is 100% functional yet dyng.zip
December 7, 20232 yr Community Expert ATA issues with disk1, replace cables and post new diags, there are also issues with another disk (ATA6) but cannot see which device it is.
December 7, 20232 yr Author ok I will try to replace the cable when I get home and for the other disk if it is a smart error it is normal it is an isolate disk for vms
December 8, 20232 yr Author Hello, new diagnostics with the replace câble, actually it's good no problem for the moment tower-diagnostics-20231208-0902.zip
December 8, 20232 yr Author The problem can come form what's, i have use new cable sata 6GB/s direct to my motherboard?
December 8, 20232 yr Community Expert 24 minutes ago, seedy-char2815 said: The problem can come form what's, i have use new cable sata 6GB/s direct to my motherboard? Have you also checked the power side of things for the problem drive.
December 8, 20232 yr Author Yes but i can't do nothing if the problem from this i use power supply with low number power sata and i use StarTech.com SATA to 4x SATA Power Splitter Cable for augmente the number, the originale cable not enought longer, i try to switch the power sata i use and in syslog no ata error actualy maybe tower-diagnostics-20231208-1942.zip
December 8, 20232 yr Community Expert SATA->4x SATA often causes problems due to the initial SATA connector having trouble carrying enough current for 4 drives. Does your PSU have any Molex connectors? Molex->4x SATA tends to be better as the Molex connector can successfully carry more current.
December 8, 20232 yr Author Yes it's molex to sata x4 but i have only connect one disk connect to my sata x4 one the first connector
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.