Hello All,

 

I have had a rough last few days. I had UDMA errors disable two drives on my system. I was finally able to get the drives rebuilt. 

So now I have issues with Docker. I could not get some Docker apps to start. So I removed the docker image and recreated it. I still can not get The apps to start. I am lost at the moment any help would be appreciated.  I am putting the diags in the post. The Dockers are running off a mirrored cache.

 

telecaster-diagnostics-20231113-2022.zip

 

Thank you for any assistance.

 

 

Docker image seems good and don't see any errors logged, what error do you see when after trying to start a container?

Thank you for the reply, this is what I get when starting NGINX

 

[cont-init   ] 55-nginx-proxy-manager.sh: ln: /config/logs: I/O error
[cont-init   ] 55-nginx-proxy-manager.sh: terminated with error 1.

 

I have also tried copying a file from the dockercache to a shared folder on the the array and I get this error.

rsync: [generator] recv_generator: failed to stat "/mnt/user/oldasppdata/embyserver.txt": Input/output error (5)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1336) [sender=3.2.7]

 

 

 

Edited November 14, 20232 yr by drando

Thank you for your response. I was able to find the culprit, I had a WD SSD drive in the system generating errors. I removed it out of Unraid. 

 

The drive was generating the following errors

 

Nov 13 19:12:10 Telecaster kernel: ata7.00: exception Emask 0x0 SAct 0x3000 SErr 0x0 action 0x0 Nov 13 19:12:10 Telecaster kernel: ata7.00: irq_stat 0x40000001 Nov 13 19:12:10 Telecaster kernel: ata7.00: failed command: WRITE FPDMA QUEUED

 

As soon as i removed it as an Unraid device, The whole file system started working again. Copies and Docker containers are fully funtional.

 

Thanks again