Tunatron Posted November 14, 2023 Share Posted November 14, 2023 I made some hardware changes and my USB drive failed. Have had issues getting it to boot from USB, but now it finally boots I'm getting prompted to set a root password. This is after copying my backed up config folder into the new USB. However, when trying to set this password and proceed it just sits loading indefinitely. I'm really not sure what to do next, never seen this before. Quote Link to comment
Frank1940 Posted November 14, 2023 Share Posted November 14, 2023 Try to boot using the Safe Mode... Quote Link to comment
Tunatron Posted November 14, 2023 Author Share Posted November 14, 2023 So I re-seated my memory and ran a memtest for a while without issues. Now I've been able to get into the WebGUI with my original USB backup while booting in CSM/Legacy mode. SAS card drives are missing now, but we've made progress. Thanks for taking a moment to reply - I appreciate it. Quote Link to comment
JorgeB Posted November 14, 2023 Share Posted November 14, 2023 Please post the diagnostics. Quote Link to comment
Solution Tunatron Posted November 14, 2023 Author Solution Share Posted November 14, 2023 I think this has been a motherboard problem instead of an unraid problem: MSI Tomahawk z790. Issues in my original post were happening while trying my backup USB in UEFI mode and a new USB w/ copied config in UEFI mode. Re-imaged my original backup into it's original legacy boot, and got into unraid after setting motherboard to CSM and Legacy boot. While in legacy mode, i get no video during boot from motherboard until unraid's login text starts scrolling, got into WEB Gui, no SAS drives. Reset CMOS, got back into bios, it sees the SAS card, I set it back to Legacy boot, boot from USB, etc. Still get no video during post, but Unraid is back up and all my drives are visible and correctly assigned. This has been really weird. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.