I hope somebody can help me.
I wanted to replace a disk with a larger disk, so before doing that I moved the data using unbalance scatter.

since that has completed, I can't see my shares in the GUI and docker apps are frozen, can't restart.

I'm very new to unraid, so any help would be appreciated.

allfather-diagnostics-20231123-1006.zip

A reboot should bring the shares back, then post new diags if there are other issues.

Thank you so much Jorge, I wasn't sure I should restart before I got advice in case you needed extra logs etc. But that did the trick.
Is there any easy way for a noob like me to know when I should and shouldn't try a reboot, in case I encounter an error like this again?

Also, is it advisable to use unbalance, to move data off disks before replacing them with larger disks?

Thanks so much again, for sorting me out so quickly

12 minutes ago, mpmm said:

Is there any easy way for a noob like me to know when I should and shouldn't try a reboot, in case I encounter an error like this again?

In this case the problem was logged in the syslog, and it's not an uncommon issue after moving files, but generally it's not a problem to try a reboot first, but save the diags before doing it in case they are needed later.

Great, thanks again for helping!

 

Just thought I would mention that moving files so you can upsize a disk is the wrong approach. Just replace the smaller disk with the larger disk and let it rebuild.

1 minute ago, trurl said:

Just thought I would mention that moving files so you can upsize a disk is the wrong approach. Just replace the smaller disk with the larger disk and let it rebuild.

Okay, thanks for the advice, I'll try that for the next disk swap!