October 2, 201114 yr Hi, After i changed my comp(nt unraid) physical network card(i have 2 installed) I couldnt access unraid since then. I tried reboot both unraid and my own comp but it doesnt help. Could not access webgui and network, but able to access through telnet. Nothing changed on unraid, stayed as what it was. Unraid 4.7 Tower login: root Linux 2.6.32.9-unRAID. root@Tower:~# ifconfig eth0 Link encap:Ethernet HWaddr 20:cf:30:05:3d:fc inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:7000 Metric:1 RX packets:1786 errors:0 dropped:0 overruns:0 frame:0 TX packets:2196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:456934 (446.2 KiB) TX bytes:1293480 (1.2 MiB) Interrupt:26 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:285 errors:0 dropped:0 overruns:0 frame:0 TX packets:285 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25983 (25.3 KiB) TX bytes:25983 (25.3 KiB) syslog.txt
October 2, 201114 yr Hi, i have a similar problem. My server runs fine for month´s, but to lower the power consumption, i tried to use a sleep script yesterday. I have tested some configurations the hole day, but then suddenly i cant access the server by web or by ping or something. I thought the onboard network was damaged, so i tried a pci card. That runs a few hours, but now the same problem. With static ip, written in the network.cfg at my windows pc, it starts, but no access. ifconfig looks similar the one in the first post. With dhcp the server don´t get an ip. I tried another router which i testet the dhcp with a new laptop but no success. I tried a couple of commands i found here in the forum like: /sbin/dhcpcd -n /etc/rc.d/rc.inet1 restart I don´t know what to do next... I hope its ok to post this here. sry, my version is 4.7 syslog.txt
Archived
This topic is now archived and is closed to further replies.