December 21, 20232 yr Hi community, I've been stuck with an unraid setup. I'm using a PC with Asrock Steel Legend X570 motherboard as an Unraid build. Storage configuration is set to AHCI. I had 3 8TB hard disks attached to it for some time now, and it was working fine. Recently I added two 10TB hard disks to it, but only one is showing up in Unraid. But both the hard disks are showing up in the Bios Storage Configuration. I wonder if I'm missing something. I know that I need to assign one larger capacity drive as parity. So do I need to rebuild the parity with one larger capacity 10TB drive that is showing up in the unassigned list before the second 10TB one shows up? Apologies if this is a noob-level question or if this has been answered elsewhere. Thanks a lot for the help. I've also attached the diagnostics file with this post. tower-diagnostics-20231221-1319.zip
December 21, 20232 yr Community Expert Looks like the system is having problems with one of the drives: Dec 21 13:18:37 Tower kernel: ata2.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Presumably this is the 'missing' drive. Probably need to carefully check the power and sata cabling to the drive.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.