December 30, 20232 yr New UnRaid user and I'm still sorting things out. I have two 14 TB drives as parity and two 14TB drives as data. I ran a manual parity check which started yesterday, 12/28/23. The Main tab shows the parity completed fine with zero errors. Yet the log shows errors. Which data is correct? I ran the manual parity check with the "Write corrections to parity" unchecked, as I just wanted to verify a known good parity. The times the parity check completed seem to align 3:33pm and 3:34pm for the log. Which is correct? Guessing I should run another manual parity with "Write Corrections to parity" checked? Also I noticed my Parity History Log in Main is empty. I don't know why and I can't find a setting that I may have turned off. Main Tab Showing 0 Errors. Log Notification Showing Parity Errors Thank you for reading this and providing your knowledge.
December 30, 20232 yr Community Expert The one on main will be correct, there's an issue with the notifications sometimes, but it has been difficult to reproduce to fix.
December 30, 20232 yr Author Thank you Jorge. As a follow up any idea on why my Main Tab "Parity History" button/log would be totally empty? Is there a setting? I did look at the log file on the Flash Drive and there is about 7 lines of info, but nothing in the Parity History button/log. Thanks Jorge.
December 31, 20232 yr Community Expert Solution It should always show the ones logged on parity-checks.log, unless maybe the file has some corruption.
December 31, 20232 yr Author I rebooted the server and the issue resolved with the previous parity history data appearing in the Parity History log. Thanks Jorge!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.