Cii1 Posted January 4 Share Posted January 4 (edited) I had one drive fail, so I got an Ironwolf Pro 8TB to replace. I've noticed there are issue with this drive with LSI controller in Unraid, so I follow the steps from the link bellow I also changed the SATA connection to on-board one as well. However, there are errors keeps popping up with the drive, like COMRESET FAILED (ERRNO=-16), and I/O error logical block async paage read. This is a replacement, I had the same problem with the first one I got. I don't know if it's the drive issue, the power delivery issue. Since I am using 550W for 4x 12TB HDD, 1x 8TB HDD, 4x 4TB HDD and 1x 1TB SSD Here is the diagnose file takserver-diagnostics-20240104-1821.zip Edited January 4 by Cii1 Quote Link to comment
Cii1 Posted January 4 Author Share Posted January 4 1 hour ago, JorgeB said: Please post the diagnostics. The diagnostics is uploaded above Quote Link to comment
JorgeB Posted January 4 Share Posted January 4 Connect the disk to the onboard SATA controller, you can swap with another disk if easier, and post new diags. Quote Link to comment
Cii1 Posted January 4 Author Share Posted January 4 4 minutes ago, JorgeB said: Connect the disk to the onboard SATA controller, you can swap with another disk if easier, and post new diags. I tried swapping to on-board SATA controller, changing different SATA cables and rearranging the SATA power connections, the problem is still here Quote Link to comment
Solution JorgeB Posted January 4 Solution Share Posted January 4 The logs you posted shows continuous disk errors, I would like to see if if they persist using a different controller and cables, if yes it's likely a disk issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.