Hi everyone,

 

I'm reaching out because I've been experiencing frequent crashes with my Unraid setup, and I'm at a bit of a loss about what could be causing them. I've enabled the syslog server to get more insights, and I've attached the syslog file here for reference. Additionally, I've included the diagnostic file in hopes that it might shed some light on the issue.

 

If anyone could take a look and provide any insights or suggestions on what might be going wrong, I would really appreciate it. I'm not sure if it's a hardware issue, a software conflict, or something else entirely.

 

Additionally, I should mention that whenever Unraid crashes, the only way I can get it back up and running is by performing a hard reset. This involves directly cutting off the power to the server and then turning it back on. It's quite concerning as I worry about the potential damage this might cause to my system in the long run. Any insights into why this is happening and how to avoid these hard resets would be incredibly helpful. Any help or guidance would be greatly appreciated.

 

Thanks in advance for your time and help!

oscnhome-diagnostics-20240110-1145.zip syslog-192.168.1.3.log

Unfortunately there's nothing relevant logged, this usually points to a hardware issue, one thing you can try is to boot the server in safe mode with all docker/VMs disabled, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one.