Hello

Again sorry for the so many threads but in my, almost one month experience with unraid seems like I am meeting all known problems

While hovering around cracking my head trying to understand why containers are unreachable over tailscale (I read somewhere the issue could have been unraid connect) I went in the sys log and saw many metadata corruption detected, I tought for stuff like these there would have been a notification

Now, today I found over again my system totally frozen and unreachable over lan (as stated in some past threads..) and only solution is to long press the power button

Now i am quite panicking since in 3 days I will have to depart away and it will become randomly unrensponsive and container unreachable with tailscale

would anybody help me translate what these xfs corruption mean?homedata-syslog-20240110-1510.zip

Thanks as always

 

homedata-diagnostics-20240110-1616.zip

Edited January 10, 20242 yr by mich2k

Check filesystem on disk1, run it without -n

54 minutes ago, JorgeB said:

Check filesystem on disk1, run it without -n

ok so i will run xfs_repair /dev/disk1

may I ask if are there any plugins or settings to enable notifications for this kind of errors?

 

edit: shall i run this from the unraid cli without unmounting it (?)

Edited January 10, 20242 yr by mich2k

Not that I know of, usually filesystem corruption is pretty obvious, e.g., the disk won't mount.

1 hour ago, JorgeB said:

Check filesystem on disk1, run it without -n

and sorry for the slight OT, I have a RTL8125BG and I just saw this

 

If you are using a Realtek 8125 2.5GbE NIC there is an issue with the 'stock' r8169 Linux driver that causes system hang
if you enable jumbo frames. Either do not use jumbo frames or consider installing the Realtek vendor-supplied r8125
driver plugin. (FYI: the stock 'r8169' driver also handles the Realtek 8125 chip sets - there is no separate 'stock' r8125
driver, yes this is confusing).

 

I did not touch anything may this be the reason why my system becomes randomly unresponsive?

You are not using jumbo frames, so you won't be affected by that, if the server is crashing you can enable the syslog server and post that after a crash/hang.