January 12, 20242 yr I have a new NIGGIGA 10GB 1 port sfp card. It has an Intel 82599 chipset. It shows up in my system devices as Quote [8086:10fb] 03:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) but it does not show up as an available interface under network settings, and the switch (an Ubiquiti Unity US-48) does not see it when connected. The 4 intel gigibit interfaces work without issue. I have added my diagnostics diagnostics.zip
January 12, 20242 yr 53 minutes ago, pramoino said: I have a new NIGGIGA 10GB 1 port sfp card. Ummm... Has anyone said they support it? 54 minutes ago, pramoino said: the switch (an Ubiquiti Unity US-48) does not see it when connected. Ummm... Has anyone said they support it? 55 minutes ago, pramoino said: The 4 intel gigibit interfaces work without issue. Intel nics are rad/rule/sick/rock/narley Doesn't change anything. MrGrey.
January 12, 20242 yr Author I have not seen anyone talk about NIGGIGA, but it is a highly recomend chipset. The switch should not matter, i have teste the port with other 10G equitment and confirmed it works, and I have tryed this equitmetn on moutiple ports and it stil doest not show in unraid. But I have seen it asked for on other posts so I included it here. The 4x motherboard ethernet ports work fine connected to the same switch. Edited January 12, 20242 yr by pramoino
January 12, 20242 yr Community Expert Solution ixgbe 0000:03:00.0: The EEPROM Checksum Is Not Valid Similar to this, look for a firmware update: https://forums.unraid.net/topic/146542-x10sdv-4c-tln2f-does-not-recognize-mb-10g-nics/?do=findComment&comment=1319716
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.