Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Download of appfeed failed wenn ich OpenVPN Server am Router aktiviere

Featured Replies

Liebe Netzwerk-Wizards,

 

zu aller erst: ich finde Unraid super und ebenso die Community im Forum -> hat mir schon einige male geholfen. Danke!!

 

Mein Problemchen:

- Heimnetz mit Synology Router (rt6600ax, 10.99.0.1) dort hängt mein physischer Unraid Server im 10.99.0.0/24 Netz

- Ich gehe auf Unraid (6.12.6) und besuche  "Apps" -> kein Problem, Appfeed wird geladen

- Ich starte am Router (!!) den OpenVPN Server (Netz 172.22.0.0/24)

- Ich besuche wiederum auf Unraid "Apps" und bekomme:

"

Download of appfeed failed.

Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again.

Alternatively, there is also a chance that the server handling the application feed is temporarily down. See also this post for more information

Last JSON error Recorded: Syntax error

"

 

- Ich schalte den OpenVPN Server am Router aus und besuche "Apps" auf dem Unraid Server -> alles wird einwandfrei geladen

- das Verhalten kann ich immer wieder reproduzieren

 

Was ggf. auch interessant ist: 

Bei eingeschaltetem OpenVPN Server im Unraid Terminal scheint DNS zu funktionieren:

 

"

root@laFamiliaUnraid:~# ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=56 time=16.6 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=56 time=16.5 ms
64 bytes from 1.1.1.1: icmp_seq=3 ttl=56 time=16.4 ms
^C
--- 1.1.1.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 16.395/16.487/16.567/0.070 ms
root@laFamiliaUnraid:~# nslookup heise.de
Server:         10.99.0.1
Address:        10.99.0.1#53

Non-authoritative answer:
Name:   heise.de
Address: 193.99.144.80
Name:   heise.de
Address: 2a02:2e0:3fe:1001:302::

root@laFamiliaUnraid:~# 

"


Ich versteh nicht wie/warum das zusammenhängt. Ich mach nichts VPN-mäßiges auf dem Unraid Server. Vielleicht hat jemand hilfreiche Hinweise an was das liegen kann?!

 

BTW: ich habe bereit ein Ticket bei Synology offen. Die letzte Antwort des Supports war ich soll doch im Unraid Forum nachfragen ;)

 

Im Anhang sende ich euch noch die Diagnostics-Datei

 

Vielen Dank und LG

tubasumpf

lafamiliaunraid-diagnostics-20240124-1700.zip

Solved by tubasumpf

  • Author
  • Solution

Falls jemand hier drauf stößt (ist jetzt keine Experten-Lösung, Problem hats aber gefixed)

Es lag am Router: Der Port am Router an dem der Unraid Server hängt:


VPN OFF

ip addr show
...
16: lbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 90:09:d0:3b:05:73 brd ff:ff:ff:ff:ff:ff
    inet 10.99.0.1/24 scope global lbr0
...


VPN ON

ip addr show
...
16: lbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc nsshtb state UP group default qlen 1000
    link/ether 90:09:d0:3b:05:73 brd ff:ff:ff:ff:ff:ff
    inet 10.99.0.1/24 scope global lbr0
...


Irgendwie reserviert der Router bei VPN ON keine Bandbreite (NSS HTB -> kann nicht genau sagen was das ist)?!

 

Hab dann am Router die "Datenflusssteuerung" aktiviert und jedem meiner Netzwerke die "volle" Bandbreite gegeben -> problem gefixed

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.