southloven Posted January 29 Share Posted January 29 Ive been having so many problems, I figured I would load from almost scratch. This is a new setup, just attached the old array. When I create a share user, I don't see the shares listed to give the user permissions to. Is there something I need to do to get unraid to see my shares here. Or am I remembering incorrectly and there is another way? ozunraid-diagnostics-20240129-1543.zip Quote Link to comment
itimpi Posted January 29 Share Posted January 29 It is the other way around. After adding users on the page you show, you add permissions for users on the page for any particular share. Quote Link to comment
Frank1940 Posted January 29 Share Posted January 29 (edited) First, go to SETTINGS >>>> SMB >>> SMB settings and verify that SMB is enabled: Then go to the SHARES tab. Click on the SMB Share you want to connect to. Find this section on that tab: Step # 2 is where you 'allow' the share to be exported. Step # 3 is optional but I recommend that you consider using 'Private' rather than 'Public' or 'Secure'. There should be no reason for either of these unless you are connecting with a Windows 98 computer or a Media box from 2010. Step # 4 is where you set the permission for each user-- Choices are 'Read/write', Read-only' and 'No Access'. If you need help in setting SMB, here is a link to a PDF tutorial: https://forums.unraid.net/topic/110580-security-is-not-a-dirty-word-unraid-windows-10-smb-setup/ Edited January 30 by Frank1940 Replaced secodn screen capture to SMB User Access section Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.