February 6, 20242 yr Community Expert Correct command is: reiserfsck --check /dev/sdh1 Assuming sdh is the correct disk device.
February 7, 20242 yr Author It doesn't work. But I download Unraid and then I can mout it and it's visible.
February 7, 20242 yr Community Expert That's not an Unraid standard partition, also the disk capacity is wrong, if you are using an enclosure connect the disk directly to a SATA port instead.
February 11, 20242 yr Author I had no free SATA port so I order a SATA extension card. When it's in and installed I report back. Rob
February 14, 20242 yr Author I had a Supermicro AOC-SAS2LP-MV8 lyng arround and installed it. It's not visible so I take out one disk from the array and instal none put the old disk 5 in and mount it and move the content to the new disk 5. It restored my disk 4 so when this is finnished I have everything back. Thanks for all the help. Rob Edited February 14, 20242 yr by Rob_Dingen
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.