February 4, 20242 yr Hi folks, I would love to share a problem with you and maybe get some help here. Try to wake up my unraid server (HP Workstation Z440) from S3 initiated by S3 Sleep Plugin of Dynamic's. Waking up my server that is directly connected to my Fritzbox is working fine in the following cases: - Hitting a key on keyboard connected to the server - Pushing the power on button - Wake up the Server by fritzbox WebUI. (So that tells me general WOL is working) Quote root@Unraid:~# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 1 Transceiver: internal MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes What is not working - Waking up the host by using UpSnap or Wake on LAN Plugin on a different Unraid Server in the same network. - Only network device between that servers is a pihole dns and the previous mentioned Fritzbox. I have really now Idea how to analyse that. So like I said, I'm happy with any help 🙂 Thanks
February 4, 20242 yr Community Expert 5 minutes ago, Stephan M. said: Hi folks, I would love to share a problem with you and maybe get some help here. Try to wake up my unraid server (HP Workstation Z440) from S3 initiated by S3 Sleep Plugin of Dynamic's. Waking up my server that is directly connected to my Fritzbox is working fine in the following cases: - Hitting a key on keyboard connected to the server - Pushing the power on button - Wake up the Server by fritzbox WebUI. (So that tells me general WOL is working) What is not working - Waking up the host by using UpSnap or Wake on LAN Plugin on a different Unraid Server in the same network. - Only network device between that servers is a pihole dns and the previous mentioned Fritzbox. I have really now Idea how to analyse that. So like I said, I'm happy with any help 🙂 Thanks Are the two networks routed via the pihole? i.e. different ip networks? WOL uses a mac broadcast which will not go through a routed connection it would need to be bridged.
February 4, 20242 yr Author No PiHole is just the DNS that upstreams to the fritzbox. Router is the fritzbox itself and both unraid server are lan connected to it. 1. Host to wake up (10.10.10.10/24) 2. Host for waking up Host 1 (10.10.10.11/24) The usecase is pritty much safing some power. Unraid 1 is a beast and it is there to host some heavy load VM's and so on Unraid 2 is a small mini pc that is up and running 24/7 with like Cloudflare and so on.
February 4, 20242 yr Community Expert 10 minutes ago, Stephan M. said: No PiHole is just the DNS that upstreams to the fritzbox. Router is the fritzbox itself and both unraid server are lan connected to it. 1. Host to wake up (10.10.10.10/24) 2. Host for waking up Host 1 (10.10.10.11/24) The usecase is pritty much safing some power. Unraid 1 is a beast and it is there to host some heavy load VM's and so on Unraid 2 is a small mini pc that is up and running 24/7 with like Cloudflare and so on. That should be fine from a topolgy., I dont know if friztbox has any protection on its switch ports that need to be allow to enable.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.