February 7, 20242 yr i had the wireguard setup and running for a long time now i had to change the nic assignment due network restructuring there are 2 nics, 1. from intel and 2. from realtek MAC adresses are totally different after swapping unraid list 2 macs which are near neighbours the two nics are and were set to use bridge mode after swapping the eth0 with eth1 the vpn is no longer working i expected this to be an issue with the router, so i have resetted the config completly and reconfigured it again. as this does not help, it has to be something related with the nic swap. i would be glad if there is help or an idea how to fix that. Best regards casy-diagnostics-20240207-0250.zip
February 8, 20242 yr Community Expert Disclaimer: I don't use Wireguard. But since you have asked for help and not gotten a response from anyone else, here is a link to Wireguard in the Manual: https://docs.unraid.net/unraid-os/manual/security/vpn/#support If you have already found this, there are some links at the bottom of this manual section to Forum Threads that discuss Wireguard issues. Perhaps, a request in the one that seems most appropriate to your problem might get a quicker response.
February 12, 20242 yr Author Solution On 2/8/2024 at 5:22 PM, Frank1940 said: Disclaimer: I don't use Wireguard. But since you have asked for help and not gotten a response from anyone else, here is a link to Wireguard in the Manual: https://docs.unraid.net/unraid-os/manual/security/vpn/#support If you have already found this, there are some links at the bottom of this manual section to Forum Threads that discuss Wireguard issues. Perhaps, a request in the one that seems most appropriate to your problem might get a quicker response. thank you very much for your reply. i was wondering why it stopped working, without changing any parameter in the vpn and as long as the network connection is normal working in unraid it should work i had also trouble with the modem/router fritzbox 7530ax, i have replaced it with my old device 7560 and reapplied the config the same way.. now it works again, so it seemed to be an issue with the static routing but as settings are identically i expect it to be an FritzOS issue
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.