February 10, 20242 yr I have a NetApp DS4246 Disk Array Shelf. Ever since I installed it, it's been a guessing game as to whether or not the disks would be recognized when Unraid booted up. It used to be that after a few restarts eventually all the disks would get recognized and then once the array was started, there'd be 0 issues. Recently, I've not been as lucky and even when it does recognize most of the disks, 1 disk is showing up as missing. Yesterday it was disk 12. Today it's disk 13. I am using this cable "40G QSFP+ DAC Twinax Cable, 40GBASE-CR4 Passive Direct Attach Copper Cable, 1m(3.3ft), 40G QSFP Cable for Cisco QSFP-H40G-CU1M, Meraki MA-CBL-40G-1M, Intel XLDACBL1, Mikrotik, Netgear, TP-Link, D-Link" and this controller "Netapp 111-00341 4-Port SAS QSFP 6Gbps HBA vt" I am willing to buy new hardware. I just need it to work consistently. Any help would be appreciated. Thanks in advance. tower-diagnostics-20240209-1551.zip
February 11, 20242 yr Lot of errors like this: Feb 9 13:45:13 Tower kernel: pm80xx1:: mpi_smp_completion 2840: smp IO status 0xe Feb 9 13:45:13 Tower kernel: pm80xx1:: mpi_smp_completion 2841: status:0xe, tag:0x1, task:0x00000000b6dfe114 Feb 9 13:45:13 Tower kernel: sas: smp_execute_task_sg: task to dev 500a098001215ebf response: 0x0 status 0x8 Feb 9 13:45:13 Tower kernel: pm80xx1:: mpi_smp_completion 2840: smp IO status 0xe Feb 9 13:45:13 Tower kernel: pm80xx1:: mpi_smp_completion 2841: status:0xe, tag:0x1, task:0x00000000b6dfe114 Feb 9 13:45:13 Tower kernel: sas: smp_execute_task_sg: task to dev 500a098001215ebf response: 0x0 status 0x8 Feb 9 13:45:13 Tower kernel: sas: ex 500a098001215ebf phy21 PHY control failed: -70 Feb 9 13:45:13 Tower kernel: sas: ata36: end_device-21:0:21: Unable to reset ata device? Feb 9 13:45:13 Tower kernel: pm80xx1:: mpi_sata_completion 2311: status:0x39, tag:0x1, task::0x00000000dd53c773 Could be a connection issue, but those controllers have been known to have some issues, do you have an LSI HBA you could try with? Note that you'd need a different cable.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.