Daniel71 Posted February 19 Share Posted February 19 My unraid server is no longer accessible every morning. must always pull out the power plug thx for any help hpe-diagnostics-20240219-1953.zip Quote Link to comment
itimpi Posted February 19 Share Posted February 19 The syslog in the diagnostics is the RAM copy and only shows what happened since the reboot. It could be worth enabling the syslog server to get a log that survives a reboot so we can see what happened prior to the reboot. The mirror to flash option is the easiest to set up, but if you are worried about excessive wear on the flash drive you can put your server’s address into the Remote Server field. 1 Quote Link to comment
JorgeB Posted February 19 Share Posted February 19 There's filesystem corruption the cache pool, with btrfs I recommend backup and reformat, if issues continue enable the syslog server. 1 Quote Link to comment
Daniel71 Posted February 19 Author Share Posted February 19 from the system protocol Quote Link to comment
JorgeB Posted February 19 Share Posted February 19 22 minutes ago, JorgeB said: recommend backup and reformat 1 Quote Link to comment
JorgeB Posted February 19 Share Posted February 19 24 minutes ago, JorgeB said: the cache pool 1 Quote Link to comment
Daniel71 Posted February 19 Author Share Posted February 19 how can i do that? Is there a help for that? Quote Link to comment
Daniel71 Posted February 19 Author Share Posted February 19 (edited) i delete the cache volume and format it and no data will be restored from parity 😞 Edited February 20 by Daniel71 Quote Link to comment
JonathanM Posted February 20 Share Posted February 20 3 hours ago, Daniel71 said: all my cache data (80%) gone. 7 hours ago, JorgeB said: recommend backup Quote Link to comment
JorgeB Posted February 20 Share Posted February 20 I did mention to backup and then format. Quote Link to comment
Daniel71 Posted February 20 Author Share Posted February 20 no backup, my complete data gone Quote Link to comment
JorgeB Posted February 20 Share Posted February 20 I'm sorry, but I'm afraid you didn't follow the instructions, also you should already have backups of anything important, many other ways you can lose data. Quote Link to comment
Daniel71 Posted February 22 Author Share Posted February 22 My data are gone but my unraid crashed every night where is the log? Quote Link to comment
JorgeB Posted February 22 Share Posted February 22 It should be in the flash drive, /logs folder, it won't be in the sdata folder since you didn't set the remote syslog server IP. Quote Link to comment
trurl Posted February 22 Share Posted February 22 Doesn't look like syslog server was even set to mirror to flash. Copy on shutdown isn't going to help if it crashes. Quote Link to comment
Daniel71 Posted February 22 Author Share Posted February 22 No log from tonight, how can i see the log from the night? the server crashed again tonight and is no longer accessible, i always have to unplug it after every night Quote Link to comment
JorgeB Posted February 22 Share Posted February 22 15 minutes ago, trurl said: Doesn't look like syslog server was even set to mirror to flash. Yep, just looked at the last line, forgot the new setting. 33 minutes ago, JorgeB said: set the remote syslog server IP or enable mirror to flash drive. Quote Link to comment
Daniel71 Posted February 22 Author Share Posted February 22 This setting is now right? Quote Link to comment
Daniel71 Posted February 22 Author Share Posted February 22 This is the logfile? Quote Link to comment
Daniel71 Posted February 23 Author Share Posted February 23 So, this night again, my unraid server is unreachable in the morning, here is the log: syslog-previous Quote Link to comment
Solution JorgeB Posted February 23 Solution Share Posted February 23 Feb 22 18:10:37 HPE kernel: macvlan_broadcast+0x10a/0x150 [macvlan] Feb 22 18:10:37 HPE kernel: ? _raw_spin_unlock+0x14/0x29 Feb 22 18:10:37 HPE kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan] Macvlan call traces will usually end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)), then reboot. 1 Quote Link to comment
Daniel71 Posted February 23 Author Share Posted February 23 all right i will test it, let u know in a few days when the server is up and running, thx Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.